Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.
It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. window repairs near me is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.
Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However If you have double pane windows that are held in place by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this case, you will need to find some plastic spacers that help the new pane to fit properly into the frame of the window.
If you're planning to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled under.
It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.
2. Sagging
uPVC is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.
To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.
If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.
uPVC handles can also loosen up. This is usually due to screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to shut the window and perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
If you awake to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue the caulking used previously may need to be removed before a new layer of caulk can be applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This will make your window harder to clean and lower its energy efficiency.
Make sure that the drainage holes are free of debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more extreme instances, you may need to replace the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can quickly spread across the house.
It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and open in a breeze, it may be the hinges that are at the fault. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple procedure, but it is simpler when you have a person to help you hold the frame in place.
It is also worth checking that the uPVC hinges are opened and closed in the right direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should be opened.
The issue could be caused either by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photo through our website and we will be happy to give you advice.
Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to open and close more easily. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.
5. Draughts
Draughts in windows made of upvc can be caused by different factors. The hinges can also be misaligned due to wear, which can cause a gap where the sash and frame meet. If they're beyond repair, it may be required to realign them. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it may be feasible to give them a clean but in some cases it might be necessary to get them replaced.
The seals may wear out or get damaged over time, allowing air escape. Installing high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and decrease the risk of draughts.
Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are typically made of fabric filled with some type of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!
The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be cheaper to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it is always best to seek professional assistance as soon as possible.